Convenient
Multi-Compatible
Hygienic

4th Gen BabyMotion Flange - One pair

$29.99

Sale Sold out

Quantity

Size 12mm 12 15 18 21 24 27

Check our Size Guide 📏

View More Details >

Key Features

Safety & Hygiene
BPA-free, food-grade. Safe for both mom & baby. Toxin-free milk collection.
4th Gen Design
Softer material, ergonomic design, and enhanced durability.
Easier to Clean
A simple, one piece design, which means fewer parts to wash.
Opaque Material
Built for privacy, updated with a semi-transparent material.

Size Chart

Please check our sizing guide before ordering the BabyMotion Flange because their sizings are different from other brands.

Nipple size before pumping	BabyMotion Flange Size
10–12mm	12mm
13–15mm	15mm
16–18mm	18mm
19–21mm	21mm
22–24mm	24mm
25-27mm	27mm

BabyMotion Flange Compatibility

No Adapter Needed

Spectra Adapter

Ameda Adapter

How to Use & Care

Not sure how to start?

Learn in detail on this pdf. Dowload Instruction pdf

Why Moms Choose LacTeck

			Other Brands
	Imitates a baby’s natural suckling motion.
	Ultra-soft, flexible silicone that moves with the body.
	Patented moving flange technology.
	Works with most pumps
	Reduces pain and increases output.

The Science - why are babies More Effective Than Pumps

During nursing, a baby's tongue stimulates the nipple and compresses the areola. These motions, combined with suction, maximizes milk expression. These are the motions we achieved with the BabyMotion Flange's unique design so that pumping can feel more natural, like nursing.

FAQs

How to use the BabyMotion Flange?

The flange is used as any regular breast pump flange. However, because it's soft, it will "absorb" some vacuum so you may need to turn your pump up a little bit. When using, please insert tightly into the connector to ensure a good seal.

Which breast pumps are the BabyMotion Flange compatible with?

The flange is directly compatible (no adapters needed) with Medela, Lansinoh, and Hygeia pumps.

To use with Spectra or Motif pumps, please refer to this Spectra and Motif Hack. To use with Willow pump, please refer to this Willow Hack. To use with Freemie cups, please refer to this Freemie Hack. To use with Spectra cups, please refer to this Spectra Cup Hack. You can also use it with Baby Buddha pump by following the component hacks.

How to use the BabyMotion Flange with Spectra pumps?

We usually recommend getting the Maymom Spectra Adapter for use with Spectra pumps.

What sizes of BabyMotion Flange are available?

We currently offer 12mm, 15mm, 18mm, 21mm , 24mm, and 27mm.

What size of BabyMotion Flange should I get?

Please note that the BabyMotion Flange has a different design than regular plastic flanges so sizings from different brands are not directly comparable. You can measure your nipple size before pumping using the Nipple Caliper and then refer to the below sizing guide (we suggest before pumping measurements especially if you have elastic nipples). If you have additional questions, please use the chat box on our website.

Pre-pumping Nipple Size ---------->BabyMotion Flange Size

10-12mm ------------------------------->12mm

13-15mm ------------------------------->15mm

16-18mm ------------------------------->18mm

19-21mm ------------------------------->21mm

22-24mm ------------------------------->24mm

25-27mm ------------------------------->27mm

Why is the BabyMotion Flange so heavy?

The flange is heavy because we have to ensure that the breast pump efficiency is not compromised when using a soft material like silicone. Because it's heavy, please make sure to disconnect the flange first once done pumping to prevent bottle from tipping over and losing precious breast milk. We also recommend using a tight fitting pumping bra.

How to clean the BabyMotion Flange?

Before first time use, wash with warm soapy water and steam for 3 minutes to sterilize. Afterwards, simply wash with warm soapy water and air dry. It's ok to sterilize with steam occasionally but we do not recommend frequent steaming as discoloration may occur.

Why does my BabyMotion Flange fall off the connector?

Most likely due to it not being inserted tightly. Please use a twisting motion to insert it all the way into the connector. Please refer to this instruction for more details on how. It could also happen when there is residual milk/oil left on the flange or the connector. We recommend using warm soapy water or baking soda to thoroughly wash both parts.

Can I place my BabyMotion Flange in the fridge between pumps?

No. We don't recommend it because they will be cold and attract moisture once taken out of the fridge, making them slippery and hard to stay on the connector.

Can I use coconut oil or other lubricants with the BabyMotion Flange?

Yes, although we suggest washing the oil/lubricant off with warm soapy water thoroughly after each pumping session.

How often should I replace the BabyMotion Flange?

The BabyMotion Flange should last a few months and only need replacement when you notice cracks or discoloration.

These flanges fit so comfortably. Theyre easy to use and empty me well.

Finally found the best flanges that gave me the most output while feeling comfortable.

I was so close to ending my pumping journey because I could not figure out the correct flange size. I tested anywhere from 16mm-21mm. I found these silicone ones to be the best comfortable fit and the design helped me get the most output! I’ve tried other popular silicone flanges but they do not compare to these! Also, the customer service was phenomenal! They stayed true to their size guarantee program which saved my pumping journey because I had spent so much money on other flanges and finding the right one for me.

These helped me get the output I needed in 10 minutes less from everything else I used! A big THANK YOU to the lacteck team!

Hi Brenda! We are thrilled to hear that our 4th Gen BabyMotion Flanges have been a game-changer for you in your pumping journey. We are so glad that our product has been able to provide you with both comfort and efficiency. Our team is dedicated to providing our customers with the best possible experience and we are happy to hear that our size guarantee program has been helpful for you. Thank you for choosing LacTeck and for taking the time to leave a review. Happy pumping!

The reason I’m still pumping!

These flanges are so comfortable, I have been able to keep up with pumping for nearly 7 months.

Hi there Kaley! Thank you so much for taking the time to share your positive experience with our 4th Gen BabyMotion Flanges. We're thrilled to hear that they have been comfortable for you and have helped you continue pumping for almost 7 months! Keep up the great work, and please let us know if there's anything else we can do to support you. Happy pumping!

THE BEST!

I love LacTeck flanges. They have made my pumping journey so much easier (both times)! The company is wonderful to work with, as well. I am so grateful!

Thank you for your kind words! We are thrilled to hear that our flanges have made your pumping journey easier. It's our goal to provide products that make breastfeeding and pumping more comfortable and efficient for moms. We appreciate your support and are always here to help. Happy pumping!

Great buy!

Sizing was a bit tricky but I followed the suggestions and had a great fit.

Far less leaking, more comfort, and increased output. Why arre plastic flanges still the standard?!

Thank you so much for your review! We're glad to hear that our 4th Gen BabyMotion Flange has been a great buy for you. We understand that sizing can be tricky, but we're happy to hear that you were able to find a great fit by following our suggestions. We couldn't agree more about plastic flanges - we're always striving to provide more comfort and increased output for our customers. Thank you for choosing our product and for taking the time to leave a review. Happy pumping!